StorEdge and Device Control Firmware Updates

 

Version Date August-13-2017

Firmware versions

CPULG DCDCLG BMS
3.21712.31.4.6.0

 


 

 

Release Notes

New Features and Enhancements

1. StorEdge:
1.1 Support of StorEdge + Home Energy Management (Device Control)
2. Home Energy management (Device Control): 
2.1 Added Excess solar power mode
2.2 Support of StorEdge + Home Energy Management (Device Control)
3. Meters:
3.1 Support for three phase revenue grade WND meter (CT setting lock feature)
3.2 Added inverter production and site production meter types, to distinguish between meters installed at inverter output and on all the site
3.3 Support for meter measurements at the MV connection point, for delta and WYE MV grids. Under Device Type -> Meter, added:
i. Topology – WYE/Delta
ii. PT Scale - potential transformer scale factor, 1-999
4. Other:
4.1 Export limitation clustering: for up to 16 buses of up to 32 inverters per bus.
4.2 Austria: added Q Global Setting and P Global Setting menus under Reactive Power Conf, to comply with TOR D4 requirements. Requires supporting DSP versions.
4.3 New countries: Belgium Delta, Norway Delta, Netherland MV, Taiwan 220V No N; All new countries require supporting DSP versions.
 
Fixed Issues
1. Home Energy Management (Device Control): Smart Save mode enabled also when battery is OFF

 

Firmware File


Important notes

1. Use Firefox or Chrome browsers to download firmware files.
2. The firmware file can only be loaded to a memory card that meets the specifications listed in the Software Upgrade using SD/MicroSD card application note
3. For Tesla Powerwall 1 use earlier firmware versions.
4. Firmware upgrade procedure can be found in:
 
_______________________________________________________________________________________________________________________________________________________________

Version Date June-08-2017

Firmware versions

CPUDSP1DSP2LG DCDCLG BMS
3.21551.210.10692.52.4152.31.4.6.0

 


 

 

Release Notes

New Features and Enhancements
1.      StorEdge:
1.1.   Support of LG Chem RESU7H and RESU10H batteries with StorEdge inverter (with Backup mode) and StorEdge Interface SESTI-S1/SESTI-S2 with single phase non-HD-Wave inverters.
 

Firmware File


Important Notes

1. Use Firefox or Chrome browsers to download firmware files.
2. The firmware file can only be loaded to a memory card that meets the specifications listed in the Software Upgrade using SD/MicroSD card application note
3. For Tesla Powerwall 1 use earlier firmware versions.
4. Firmware upgrade procedure can be found in:
 
_______________________________________________________________________________________________________________________________________________________________

Version Date May-22-2017

Firmware version

CPUDSP1DSP2LG DCDCLG BMS
3.21501.210.10682.52.4102.31.4.6.0

 


 

 

Release Notes

New Features and Enhancements
1.      StorEdge:
1.1.    Support of LG Chem RESU7H and RESU10H batteries with StorEdge Interface SESTI-S1/SESTI-S2 with single phase non-HD-Wave inverters, or StorEdge Inverter.
 

Known Issues
1.3.    StorEdge Inverters do not work in Backup mode; next version will support this.


Firmware File

LG_StorEdge_21_05_17_CPU_3_2150_Dcdc_2_3_BMS_1_4_6_0_DSP1_1_210_1068_DSP2_2_52_410_Venus3Mngr_1_0_274_Venus3Pwr_2_0_140.bsuf
Note: Use Firefox or Chrome browsers to download firmware files.
Note: For Tesla Powerwall 1 use earlier firmware versions.
Note: Firmware upgrade procedure can be found in:

1. StorEdge Interface:
storedge_interface_wiring_quick_guide_and_on_site_checklist_for_lg_batteries.pdf
 

________________________________________________________________________________________________________________________________________________________________

Version Date May-28-2017
 

Release Notes

1.      StorEdge:
1.1.    Resolved issues: When two batteries are connected to StorEdge Interface SESTI-S2 or to StorEdge Inverter SExxxx-xx2, the system will stop discharging only if both batteries reach minimum SOE (previously discharge stopped as soon as one battery reached minimum SOE).
2.      Device Control:
2.1.   Fixed bug which didn’t enable using Smart Save schedule when Maximize Self-Consumption was selected and there was no battery connected.

Firmware version

CPUDSP1DSP2Powerwall 1
3.20231.210.10682.52.4102.30.5

 



 

Firmware Files

Notes:
1. Use Firefox or Chrome browsers to download firmware files.
2. When upgrading a system with Powerwall 1 with firmware version lower than 2.19.10, first upgrade to version 2.19.10 (version available on this page) and only then upgrade to the latest FW version.

BATTERY PART NUMBER

BATTERY SERIAL NUMBER

FIRMWARE FILE

1067000-00-B

T16D

0006143
0006229-0006273, 0006579-0006585
0006587-0006641, 0006726-0006900
0006923-0007043

Type B1 batteries

CPU_3_2023_Tesla_2_30_5_B1_May_23_2017.bsuf

T16E

0007601-0007631, 0007633-0007648
0007650-0007655, 0007657-0007675

T16F

0007676-0007711, 0007713-0007785
0007796-0007805, 0007827-0007832
0007834-0007836

T16F

0007859-0007904, 0007906-0007957
0008265-0008267, 0008279-0008304
0008430-0008442

Others

Type B batteries

CPU_3_2023_Tesla_2_30_5_B_May_23_2017.bsuf

1067000-00-C

T16D

0006154- 0006158, 0006274-0006577
0006649, 0006651-0006675
0006677-0006698, 0006725
0007097-0007129, 0007138-0007141
0007146-0007330, 0007332-0007337
0007339-0007390
Type C batteries

CPU_3_2023_Tesla_2_30_5_C_May_23_2017.bsuf

T16E

0007480-0007526, 0007530-0007540
0007544-0007596, 0007807-0007826

T16F

0007847-0007852, 0007856, 0007958
0007960-0008049, 0008051-0008136
0008305-0008385, 0008443-0008462
0008473-0008589, 0009451-0009555
0009561-0009562, 0009564-0009568
0009571-0009574, 0009576-0009577
0009579-0009637, 0009639-0009668

T16G

0009798-0009831, 0009833-0009931
0009937-0009999, 0010000-0010013
0010023
0010026-0010033, 0010038-0010068
0010070, 0010072, 0010074-0010075
0010082-0010090, 0010093
0010096-0010097, 0011145-0011156
0011446-0011464, 0011466, 0011468
0011471-0011474, 0011481-0011483
0011485-0011544, 0011559-0011586

1067000-00-C

or

1067000-00-E

or

1067000-01-E

T15K

0000501, 0000507, 0000610

Type E batteries

CPU_3_2023_Tesla_2_30_5_E_May_23_2017.bsuf

T15L

0000804, 0001137, 0001921, 0001924
0001927, 0002229, 0002467, 0002532
0002549-0002551, 0002557-0002558
0002574-0002575, 0002591
0002595-0002596, 0002598-0002601
0002603-0002604, 0002641, 0002644
0002647-0002649, 0002651-0002654
0002666, 0002671-0002672
0002674, 0002677, 0002681-0002682
0002686-0002689, 0002691-0002693
0002695-0002697, 0002699
0002707-0002713, 0002715

T16C

0005396-0005397, 0005399

T16G

0009832, 0009932-0009936
0010014-0010022, 0010024-0010025
0010034-0010037, 0010069, 0010071
0010073, 0010076-0010081
0010091-0010092, 0010094-0010095
0010176-0010184, 0010229-0010246
0010248-0010296, 0010298-0010331
0010333-0010340, 0010342-0010362
0010488-0010636, 0010638-0010648
0010650-0010868, 0010870-0011141
0011395-0011421, 0011423-0011444
0011465, 0011467, 0011469-0011470
0011475, 0011477-0011480
0011484, 0011545-0011557
0011596, 0011600-0011602
0011604-0011630, 0011632
0011643-0011644, 0011658-0011659
0011661-0011662, 0011904-0011905

Others

Type E1 batteries

CPU_3_2023_Tesla_2_30_5_E1_May_23_2017.bsuf

 

 

 

Version Date March-02-2017


 

Firmware version

CPUDSP1DSP2TESLA
3.20161.210.10662.52.4102.30.4

 

 

 

Release Notes

New Features and Enhancements

1.      StorEdge:
1.1.    Support of two Tesla Powerwall 1 batteries for high power (other than Type B+B). Requires StorEdge Inverter/Interface for higher power output.
1.2.    Two Powerwall 1 batteries when used for high capacity: seamless transition between two batteries during backup
1.3.    Support Tesla Powerwall 1 heating when battery temp is -20 to 0 °C
1.4.    For Tesla Powerwall 1 with firmware v2.30.4, dark start (wake up from DC) is:
·      Enabled in StorEdge Inverters (with backup)
·      Disabled in all other inverters
1.5.    Charge of “Backup reserved” part of battery, or all battery charge when using “Backup only”, can now be selected between PV only and between PV+AC (default).
1.6.    StorEdge Inverters: RS485-2 support, including menu display (requires compatible communication board with RS485-2)
2.      HD-Wave Inverters:
2.1.    StorEdge support (non-backup)
2.2.    Improved IR button responsiveness behavior
3.      Device Control: Support of multiple Smart Save schedules per day
4.      Other:
4.1.    New countries: Thailand MEA MV, Thailand PEA MV, China MV, France MV; All new countries require Digital v1.13.818 and above
4.2.    High frequency telemetry for site info and device control info
 
Fixes
1.    Device Control: Import threshold automatically set according to device rated power; removed from device properties menu
2.    Meters: Fixed Inepro PRO380 parity setting - commissioning menu now sets its to parity = none
 

Firmware Files

Note: Use Firefox or Chrome browsers to download firmware files.

Battery Part Number

Battery Serial Number

Firmware File

1067000-00-B

T16D

0006143
0006229-0006273, 0006579-0006585
0006587-0006641, 0006726-0006900
0006923-0007043

Type B1 batteries

CPU_3_2016_Tesla_2_30_4_B1_Mar_02_2017.BSUF

T16E

0007601-0007631, 0007633-0007648
0007650-0007655, 0007657-0007675

T16F

0007676-0007711, 0007713-0007785
0007796-0007805, 0007827-0007832
0007834-0007836

T16F

0007859-0007904, 0007906-0007957
0008265-0008267, 0008279-0008304
0008430-0008442

Others

Type B batteries

CPU_3_2016_Tesla_2_30_4_B_Mar_02_2017.BSUF

1067000-00-C

T16D

0006154- 0006158, 0006274-0006577
0006649, 0006651-0006675
0006677-0006698, 0006725
0007097-0007129, 0007138-0007141
0007146-0007330, 0007332-0007337
0007339-0007390
Type C batteries

 

CPU_3_2016_Tesla_2_30_4_C_Mar_02_2017.BSUF

T16E

0007480-0007526, 0007530-0007540
0007544-0007596, 0007807-0007826

T16F

0007847-0007852, 0007856, 0007958
0007960-0008049, 0008051-0008136
0008305-0008385, 0008443-0008462
0008473-0008589, 0009451-0009555
0009561-0009562, 0009564-0009568
0009571-0009574, 0009576-0009577
0009579-0009637, 0009639-0009668

T16G

0009798-0009831, 0009833-0009931
0009937-0009999, 0010000-0010013
0010023
0010026-0010033, 0010038-0010068
0010070, 0010072, 0010074-0010075
0010082-0010090, 0010093
0010096-0010097, 0011145-0011156
0011446-0011464, 0011466, 0011468
0011471-0011474, 0011481-0011483
0011485-0011544, 0011559-0011586

1067000-00-C

or

1067000-00-E

or

1067000-01-E

T15K

0000501, 0000507, 0000610

Type E batteries

CPU_3_2016_Tesla_2_30_4_E_Mar_02_2017.BSUF

T15L

0000804, 0001137, 0001921, 0001924
0001927, 0002229, 0002467, 0002532
0002549-0002551, 0002557-0002558
0002574-0002575, 0002591
0002595-0002596, 0002598-0002601
0002603-0002604, 0002641, 0002644
0002647-0002649, 0002651-0002654
0002666, 0002671-0002672
0002674, 0002677, 0002681-0002682
0002686-0002689, 0002691-0002693
0002695-0002697, 0002699
0002707-0002713, 0002715

T16C

0005396-0005397, 0005399

T16G

0009832, 0009932-0009936
0010014-0010022, 0010024-0010025
0010034-0010037, 0010069, 0010071
0010073, 0010076-0010081
0010091-0010092, 0010094-0010095
0010176-0010184, 0010229-0010246
0010248-0010296, 0010298-0010331
0010333-0010340, 0010342-0010362
0010488-0010636, 0010638-0010648
0010650-0010868, 0010870-0011141
0011395-0011421, 0011423-0011444
0011465, 0011467, 0011469-0011470
0011475, 0011477-0011480
0011484, 0011545-0011557
0011596, 0011600-0011602
0011604-0011630, 0011632
0011643-0011644, 0011658-0011659
0011661-0011662, 0011904-0011905

Others

Type E1 batteries

CPU_3_2016_Tesla_2_30_4_E1_Mar_02_2017.BSUF

 

 

 


 

Version Date December-01-2016

Firmware version

CPUDSP1DSP2TESLA
3.19681.210.10572.52.4102.19.10

 

 

 

Release Notes

New Features and Enhancements
1 StorEdge:
1.1 Tesla battery firmware version changed to 2.19.10
2 Device control:
2.1 For Device Control with StorEdge systems: Disable Smart Save when system is not in “Maximize Self-consumption” mode
2.2 Performance improvements when Schedule and Smart Save overlap
2.3 Monitoring platform support (requires monitoring Device Control support):
2.3.1 Send status telemetries for every configuration change
2.3.2 Performance improvements when minimum and maximum on times are the same (Smart Save only)
 
Fixed Issues
1 StorEdge: Maximize Self-consumption table no longer corrupted after reset
2 Device Control: Immersion Heater manual control – mode is now reported correctly
 
Known Issues
None

 

Firmware Files

Note: Use Firefox or Chrome browsers to download firmware files.

Battery Part Number

Battery Serial Number

Firmware File

1067000-00-B

T16D

0006143
0006229-0006273
0006579-0006641
0006726-0006900
0006923-0007043

Firmware package B1: CPU_3_1822 Tesla_2_19_10_B1 Aug 3_2016.bsuf

T16E

0007601-0007675

T16F

0007676-0007785
0007827-0007832
0007834-0007836

T16F

0007859-0007957
0008265-0008267
0008279-0008304
0008430-0008442

Others

Firmware package B: CPU_3_1822 Tesla_2_19_10_B Aug 3_2016.bsuf

1067000-00-C

All

Firmware package C: CPU_3_1822 Tesla_2_19_10_C Aug 3_2016.bsuf

1067000-00-E or
1067000-01-E

T16G

0010176-0010184
0010229-0010331
0010333-0010636
0010638-0010648

Firmware package E: CPU_3_1822 Tesla_2_19_10_E Aug 3_2016.bsuf

T16H0011904 – 0011905

Others

Firmware package E1: CPU_3_1822 Tesla_2_19_10_E1 Aug 3_2016.bsuf


Firmware for Device Control Only:

For Device Control only (without StorEdge)  Firmware file: CPU_3_1968_Dec_01_2016.bsuf



 

For StorEdge with or without Device Control:

Battery Part Number

Battery Serial Number

Firmware File

1067000-00-B

T16D


0006143
0006229-0006273, 0006579-0006585
0006587-0006641, 0006726-0006900
0006923-0007043

Type B1 batteries

CPU_3_1968_Tesla_2_19_10_B1_Dec_01_2016.BSUF

T16E

0007601-0007631, 0007633-0007648
0007650-0007655, 0007657-0007675

T16F

0007676-0007711, 0007713-0007785
0007796-0007805, 0007827-0007832
0007834-0007836

T16F

0007859-0007904, 0007906-0007957
0008265-0008267, 0008279-0008304
0008430-0008442

Others

Type B batteries

CPU_3_1968_Tesla_2_19_10_B_Dec_01_2016.BSUF

1067000-00-C

T16D

0006154- 0006158, 0006274-0006577
0006649, 0006651-0006675
0006677-0006698, 0006725
0007097-0007129, 0007138-0007141
0007146-0007330, 0007332-0007337
0007339-0007390

Type C batteries

CPU_3_1968_Tesla_2_19_10_C_Dec_01_2016.BSUF

T16E

0007480-0007526, 0007530-0007540
0007544-0007596, 0007807-0007826

T16F

0007847-0007852, 0007856, 0007958
0007960-0008049, 0008051-0008136
0008305-0008385, 0008443-0008462
0008473-0008589, 0009451-0009555
0009561-0009562, 0009564-0009568
0009571-0009574, 0009576-0009577
0009579-0009637, 0009639-0009668

T16G

0009798-0009831, 0009833-0009931
0009937-0009999, 0010000-0010013
0010023
0010026-0010033, 0010038-0010068
0010070, 0010072, 0010074-0010075
0010082-0010090, 0010093
0010096-0010097, 0011145-0011156
0011446-0011464, 0011466, 0011468
0011471-0011474, 0011481-0011483
0011485-0011544, 0011559-0011586

1067000-00-C

or

1067000-00-E

or

1067000-01-E

T15K

0000501, 0000507, 0000610

Type E batteries

CPU_3_1968_Tesla_2_19_10_E_Dec_01_2016.BSUF

T15L

0000804, 0001137, 0001921, 0001924
0001927, 0002229, 0002467, 0002532
0002549-0002551, 0002557-0002558
0002574-0002575, 0002591
0002595-0002596, 0002598-0002601
0002603-0002604, 0002641, 0002644
0002647-0002649, 0002651-0002654
0002666, 0002671-0002672
0002674, 0002677, 0002681-0002682
0002686-0002689, 0002691-0002693
0002695-0002697, 0002699
0002707-0002713, 0002715

T16C

0005396-0005397, 0005399

T16G

0009832, 0009932-0009936
0010014-0010022, 0010024-0010025
0010034-0010037, 0010069, 0010071
0010073, 0010076-0010081
0010091-0010092, 0010094-0010095
0010176-0010184, 0010229-0010246
0010248-0010296, 0010298-0010331
0010333-0010340, 0010342-0010362
0010488-0010636, 0010638-0010648
0010650-0010868, 0010870-0011141
0011395-0011421, 0011423-0011444
0011465, 0011467, 0011469-0011470
0011475, 0011477-0011480
0011484, 0011545-0011557
0011596, 0011600-0011602
0011604-0011630, 0011632
0011643-0011644, 0011658-0011659
0011661-0011662, 0011904-0011905

Others

Type E1 batteries

CPU_3_1968_Tesla_2_19_10_E1_Dec_01_2016.BSUF

 

 

 


 

Version Date October-19-2016

 

Firmware versions

CPUDSP1DSP2Tesla
3.19581.210.10542.52.4102.22.6

 

 

 

Release Notes

 
New Features and Enhancements
1 StorEdge:
1.1 Improved maximize self-consumption response time and accuracy
2 If inverter shuts down during backup (for example due to high power), when it tries to reconnect the LCD displays “Waking up” and the elapsed time (in sec) from when it tries to reconnect.
3 Low SOE limit for battery operating range
3.1 For Tesla batteries with Tesla version 2.22.4 and above: SOE = 4%
3.2 For Tesla batteries with version lower than 2.22.4: SOE = 6%.
4 LCD indication of firmware upgrade progress – the following screens are shown in succession (upgrading battery shown only when applicable):
5 Device Control support
6 Import/Export Limitation
6.1 Improved export control response time and accuracy 
6.2 Zero export failsafe mechanism: when export limitation is set to 0, production stops if there is export for more than 30sec.
7 Inverter error codes now displayed only in hexadecimal format; previous format removed
7.1 Refer to inverter installation guide for translation between the two formats
8 Italy test from LCD; Configuration Tool will no longer be used
9 Arc detection
10 Sunspec Protocol
10.1 Indication if StorEdge system is in backup mode or not (bit 0 in I_Event_1_Vendor register)
10.2 Support of new error format – hexadecimal (register I_Event_4_Vendor)
10.3 Support of negative DC current values in the register
10.4 Improved DC voltage resolution from integers to one decimal place
10.5 Faster update of meter power measurements – up to 5sec
10.6 New battery state: no communication with battery (state 7)
11 Board replacement: param backup (activation parameters – power, country) with SD card instead of using the configuration tool; inverter configurations done after activation are not saved.
 
 
Fixed Issues
1 None
 
Known Issues
1 None
 

Firmware Files

 

Battery Part Number

Battery Serial Number

Firmware File

1067000-00-B

T16D

0006143
0006229-0006273, 0006579-0006585
0006587-0006641, 0006726-0006900
0006923-0007043

Type B1 batteries
 

T16E

0007601-0007631, 0007633-0007648
0007650-0007655, 0007657-0007675

T16F

0007676-0007711, 0007713-0007785
0007796-0007805, 0007827-0007832
0007834-0007836

T16F

0007859-0007904, 0007906-0007957
0008265-0008267, 0008279-0008304
0008430-0008442

Others

Type B batteries
 

1067000-00-C

T16D

0006154- 0006158, 0006274-0006577
0006649, 0006651-0006675
0006677-0006698, 0006725
0007097-0007129, 0007138-0007141
0007146-0007330, 0007332-0007337
0007339-0007390

Type C batteries
 

T16E

0007480-0007526, 0007530-0007540
0007544-0007596, 0007807-0007826

T16F

0007847-0007852, 0007856, 0007958
0007960-0008049, 0008051-0008136
0008305-0008385, 0008443-0008462
0008473-0008589, 0009451-0009555
0009561-0009562, 0009564-0009568
0009571-0009574, 0009576-0009577
0009579-0009637, 0009639-0009668

T16G

0009798-0009831, 0009833-0009931
0009937-0009999, 0010000-0010013
0010023
0010026-0010033, 0010038-0010068
0010070, 0010072, 0010074-0010075
0010082-0010090, 0010093
0010096-0010097, 0011145-0011156
0011446-0011464, 0011466, 0011468
0011471-0011474, 0011481-0011483
0011485-0011544, 0011559-0011586
1067000-00-C
or
1067000-00-E
or
1067000-01-E

T15K

0000501, 0000507, 0000610

Type E batteries
 

T15L

0000804, 0001137, 0001921, 0001924
0001927, 0002229, 0002467, 0002532
0002549-0002551, 0002557-0002558
0002574-0002575, 0002591
0002595-0002596, 0002598-0002601
0002603-0002604, 0002641, 0002644
0002647-0002649, 0002651-0002654
0002666, 0002671-0002672
0002674, 0002677, 0002681-0002682
0002686-0002689, 0002691-0002693
0002695-0002697, 0002699
0002707-0002713, 0002715

T16C

0005396-0005397, 0005399

T16G

0009832, 0009932-0009936
0010014-0010022, 0010024-0010025
0010034-0010037, 0010069, 0010071
0010073, 0010076-0010081
0010091-0010092, 0010094-0010095
0010176-0010184, 0010229-0010246
0010248-0010296, 0010298-0010331
0010333-0010340, 0010342-0010362
0010488-0010636, 0010638-0010648
0010650-0010868, 0010870-0011141
0011395-0011421, 0011423-0011444
0011465, 0011467, 0011469-0011470
0011475, 0011477-0011480
0011484, 0011545-0011557
0011596, 0011600-0011602
0011604-0011630, 0011632
0011643-0011644, 0011658-0011659
0011661-0011662, 0011904-0011905

Others

Type E1 batteries
 

 

 

 


 

Version Date August-03-2016

 

Firmware versions

CPUDSP1DSP2Tesla
3.18221.210.10062.52.4032.19.10
 
 
 
 
 

Release Notes

New Features and Enhancements
1 Support of multiple Tesla battery hardware options (E and E1). Use the table below to identify the appropriate firmware file for updating your battery:

Battery Part Number

Battery Serial Number

Firmware File

1067000-00-B

T16D

0006143
0006229-0006273
0006579-0006641
0006726-0006900
0006923-0007043

Firmware package B1: CPU_3_1822 Tesla_2_19_10_B1 Aug 3_2016.bsuf

T16E

0007601-0007675

T16F

0007676-0007785
0007827-0007832
0007834-0007836

T16F

0007859-0007957
0008265-0008267
0008279-0008304
0008430-0008442

Others

Firmware package B: CPU_3_1822 Tesla_2_19_10_B Aug 3_2016.bsuf

1067000-00-C

All

Firmware package C: CPU_3_1822 Tesla_2_19_10_C Aug 3_2016.bsuf

1067000-00-E or
1067000-01-E

T16G

0010176-0010184
0010229-0010331
0010333-0010636
0010638-0010648

Firmware package E: CPU_3_1822 Tesla_2_19_10_E Aug 3_2016.bsuf

T16H0011904 – 0011905

Others

Firmware package E1: CPU_3_1822 Tesla_2_19_10_E1 Aug 3_2016.bsuf

 
Fixed Issues
1 None
 
Known Issues
1 None
 

 


 

Version Date July-25-2016

 

Firmware files:

  • Type B batteries: CPU_3_1822 Tesla_2_19_10_B July 25_2016.bsuf
  • Type B1 batteries: CPU_3_1822 Tesla_2_19_10_B1 July 25_2016.bsuf
  • Type C batteries: CPU_3_1822 Tesla_2_19_10_C July 25_2016.bsuf
 

Firmware versions

CPUDSP1DSP2Tesla
3.18221.210.10062.52.4032.19.10
 
 
 
 
 

Release Notes

New Features and Enhancements
1 Support of multiple Tesla battery hardware options – different firmware file per battery type:
1.1 Type B: batteries with thermal connection terminals
1.2 Type B1: sub group of type B, identified according to the serial number:
1.2.1 T16D0006229 - T16D0006273
1.2.2 T16D0006579 - T16D0006641
1.2.3 T16D0006726 - T16D0007043
1.3 Type C: batteries without thermal connection terminals
 
Fixed Issues
1 None
 
Known Issues
1 None
 

 


 

Version Date July-22-2016

 

Firmware file: CPU_3_1822 Tesla_2_19_10_B July 22_2016.bsuf

 

Firmware versions

CPUDSP1DSP2Tesla
3.18221.210.10062.52.4032.19.10
 
 
 
 
 

Release Notes

New Features and Enhancements
1 None
 
Fixed Issues
1 StorEdge:  Battery upgrade script fix
 
Known Issues
1 None
 
 

 


 

Version Date July-13-2016

 

Firmware file: CPU_3_1822 Tesla_2_19_10 July 13_2016.bsuf

 

Firmware versions

CPUDSP1DSP2Tesla
3.18221.210.10062.52.4032.19.10
 
 
 
 
 

Release Notes

New Features and Enhancements
1 None
 
Fixed Issues
1 StorEdge:  In systems with a ZigBee Home Gateway using Charge/Discharge Profile Programming, the time is now displayed properly on the monitoring portal.
 
Known Issues
1 None
 
 

 


 

Version Date July-6-2016

 

Firmware file: CPU_3_1820 Tesla_2_19_10 July 7_2016.bsuf

 

Firmware versions

CPUDSP1DSP2Tesla
3.18201.210.10062.52.4032.19.10
 
 
 
 
 

Release Notes

New Features and Enhancements
1 StorEdge:
1.1 Inverter max output power in backup mode is set to a battery discharge power equal to the battery max power (3.3kW for the Tesla Battery).
1.2 Automatic detection of Tesla battery hardware ID.
1.3 Tesla "low energy recovery mechanism" for battery operation after sleep is now used also in backup mode.
 
 
Fixed Issues
1 None
 
Known Issues
1 None
 
 

 


 

Version Date May-18-2016

 

Firmware file: CPU_3_1810 Tesla_2_19_10 May 18_2016.bsuf

 

Firmware versions

CPUDSP1DSP2Tesla
3.18101.210.9612.52.3262.19.10
 
 
 
 
 

Release Notes

New Features and Enhancements
1 None
 
Fixed Issues
1 StorEdge – maximizing self-consumption application improvements
 
Known Issues
1 None
 
 

 

Version Date April-3-2016

 

Firmware file: CPU_3_1808 Tesla_2_19_8 April_3_2016.bsuf

 

Firmware versions

CPUDSP1DSP2Tesla
3.18101.210.9612.52.3262.19.8
 
 
 
 
 

Release Notes

New Features and Enhancements
1 StorEdge
1.1 Supports AC coupling with SolarEdge three phase inverters and with non-SolarEdge inverters
1.2 Supports 2 batteries for additional capacity
1.3 Supports backup power (with StorEdge Inverter with Backup)
 
2 Import/Export Limitation
2.1 Improved limit control accuracy and stability
2.2 Export limitation with 3rd party generator (for example a non-SolarEdge inverter) with import/export meter: generator production is taken into account when calculating the needed limitation (but it is not controlled by the SolarEdge system)
2.3 If a production meter is connected at the output of the generator, all calculated (virtual) meters are displayed in the monitoring portal; if such a meter is not connected, export limitation will work properly but only physical meters will be displayed in the portal.
2.4 Minimum import limitation: production does not start until minimum import is reached; this is equivalent to negative export
 
3 Meters
3.1 Support of up to 3 Modbus meters
3.2 Inepro meter support: InePro PRO1 (1ph meter) / PRO380 (3ph meter) with v1.18 and above: can used for production/consumption/import/export monitoring, and for export limitation
3.3 New meter type: external production (non-SE) – used for export limitation with 3rd party generator and for AC coupling with non-SolarEdge inverter
 
4 Optimizer Status Menu: added per-optimizer menus, under each of the main menus (All, Non-Reporting)
4.1 For non-reporting optimizers the last telem is either that of last telem or 0; if it’s 0 all other fields will display N/A
4.2 The screen is refreshed every 5 sec
 
5 Cellular: GSM/CDMA server connection remains open for 1 hour after pairing
 
6 External control of the inverter AC relays through the Power Reduction Interface of the inverter
 
7 Italy test from LCD; Configuration Tool will no longer be used
 
8 Sunspec Protocol
8.1 3 meter support
8.2 View meter type
 
9 SolarEdge Open Protocol:
9.1 StorEdge control
9.2 View/set grid protection parameters
 
10 Modbus over TCP
10.1 Same Modbus registers as for Modbus over RS485
10.2 Modbus TCP can be enabled/disabled with LCD button; configuration requires internal buttons
 
11 Local software upgrade with SD card: SD card can be used multiple times without having to delete the state (not applicable to SE card)
 
Fixed Issues
1 StoraEdge
1.1 Disabling limit control does not affect StorEdge system operation
 
Known Issues
1 None
 
 

 

Version Date Feb-14-2016

 

Firmware file: CPU_3_1755 Tesla_2_14 Feb_14_2016.bsuf

 

Firmware versions

CPUDSP1DSP2Tesla
3.17551.210.9452.52.3142.14
 
 

 

 

Release Notes

New Features and Enhancements
1 Tesla battery upgrade through the inverter using a micro-SD card
2 Faster upgrade of a Tesla battery
3 SunSpec/Modbus reading via TCP connection of up to 3 Modbus meters
4 SunSpec/Modbus control via TCP connection
 
Fixed Issues
1 None
 
Known Issues
1 None